Actia Psa Xs Evolution 9780.z5 Driver |verified| -

This is the most common issue. First, disconnect the USB cable, close the diagnostic software, and plug it into a different USB port. Make sure you do not use a USB hub; plug the interface directly into the motherboard.

The device is visible in Device Manager, but when you start DiagBox and connect to the car, you get a "VCI not found" or "Please connect a VDI" error. Actia Psa Xs Evolution 9780.z5 Driver

: If the software recognizes the device but cannot talk to the car, you may need to use the PSA Interface Checker tool to update or downgrade your firmware to match your DiagBox version. This is the most common issue

Crucially, the driver is most often installed rather than as a standalone download. Many users report that simply plugging in the interface after Diagbox has been installed is sufficient for the driver to load automatically. However, manual driver installation or re‑installation is sometimes necessary, especially when cloning a setup or dealing with compatibility problems on newer versions of Windows. The device is visible in Device Manager, but

: The official download portal offers the Basic+ XS / CAT Level X driver (Version 2.9.0.8) which is compatible with Windows 8, 10, and 11 (both 32-bit and 64-bit architectures).