A: This temperature is above the flashpoint of most asphalt binders, ensuring complete combustion. It also allows for the removal of binder without causing significant damage to most common aggregates, which can be crucial for subsequent gradation analysis.
A pan placed underneath the baskets to catch any fine aggregate particles that may fall through the mesh.
This factor is subtracted from all subsequent production test results utilizing that specific aggregate mix design. 5. Post-Ignition Gradation Analysis astm d6307 pdf
A complete, official copy of ASTM D6307 cannot be legally obtained for free. ASTM International maintains exclusive copyright over its standards. Accessing the full document requires a purchase. Below is a breakdown of the most common ways to obtain the official PDF, along with their typical costs and formats.
The sample is removed, allowed to cool to room temperature, and the final mass of the aggregate is recorded. Calculations and Reporting A: This temperature is above the flashpoint of
It is placed into a specially designed, heated ignition furnace (usually operating at 538°C or 1000°F).
: Once the asphalt is burned off, the remaining heated aggregate can often be used for sieve analysis (ASTM C136) to check the gradation of the mix. This factor is subtracted from all subsequent production
The high heat literally burns off (ignites) the organic asphalt binder, leaving behind only the inorganic mineral aggregates. The remaining aggregate residue is weighed after cooling.
Step-by-step instructions, including:
The test involves comparing the microbial growth on a treated (test) sample, which contains the antimicrobial agent, to an untreated (control) sample.