Causes the front Daytime Running Light to dim or completely turn off (wink) on the side where the turn signal is actively flashing. 09-Central Electrics

Turn Signal Control (Blinkleuchten-Komfortblinken Blinkzyklen) Value: Set between 1 and 5 (Default is 3) Dynamic Indicator / Puddle Light Tweaks

| Feature | Module (Long Coding) | Description / Bits | | :--- | :--- | :--- | | | 09 (Cent. Elect.) | Disables the annoying green LED on the Start/Stop button. Adaptation: Start-Stop Button LED → Set to "Not Active". | | Hill Hold Assist Adjustment | 03 (ABS Brakes) | Adjusts how long the car holds the brakes after you release the pedal on a hill. Adaptation: Hill Hold Control (Sec. Access Code usually required: 20103). | | XDS Differential Lock Enhancement | 03 (ABS Brakes) | Increases the aggressiveness of the electronic diff lock for better cornering. Adaptation: XDS → Set to "Strong" or "Very Strong". | | Steering Weight Adjustment | 44 (Steering Assist) | Changes the steering feel from Comfort/Auto/Dynamic. Adaptation: Dynamic Steering → Set desired curve. | | Optical Parking System (OPS) | 10 (Park/Steer Assist) | Visualizes parking sensors on the MMI screen (requires sensor hardware). Byte 2: Check Bit 0 (OPS Graphic). |

Module 10 (Park/Steer Assist) → Coding → Byte 2 → Enable Bit 0. Engineering Menu

Do not code your car with a weak battery. Plug in a battery tender if you plan to code for more than 15 minutes.

This moves the speedometer and tachometer needles to their maximum positions and back when you turn on the ignition, giving your A3 a sporty, racing-style startup. 17 - Instruments Function: Coding - 07 ➡️ Long Coding Helper Byte: 1 Bit: Enable Bit 0 (Staging / Gauge Test)

Change the number of times the turn signal flashes when you tap the indicator stalk once (factory default is 3). 09 - Central Electrics Function: Adaptation

Alternates the flashing between the inner and outer LED rear turn signals for a distinct custom pattern. 09 (Central Electrics)

Adaptation → Komfortblinken (Comfort Turn Signals) → Set "Komfortblinken Blinkzyklen" to desired value (1-5) 8. Fog Lights as Cornering Lights

Many modules (especially Module 09 and 03) require a login code before writing changes. VCDS and OBDEleven will usually provide a pop-up suggestion. The universal MQB access code for Module 09 is typically 31347 .

Changes the number of times the lane-change turn signal flashes when you tap the stalk (factory default is 3 blinks; can be coded up to 5). 09-Central Electrics

Location: Products > Proprietary Chips > BK2461

BK2461

The BK2461 is a RF SOC chip, which embedded the newest FLIP51 processor.

Features
1. 1.9 V to 3.6 V power supply	2. FLIP51 MCU compatible with 8051
3. A 4-stage pipeline architecture that enables to execute most of the instructions in a single clock cycle.	4. 8k bytes OTP for program
5. 256 Bytes IRAM and 512k Bytes SRAM	6. Embedded three Timer/Counter
7. Support UART I2C interface	8. Total 9/18 GPIO available
9. The most 5 PWM available	10. The embedded BIRD (Built-In Real-time Debugger) system for online debug
11. 8+1 channel ADC embedded	12. Integrated 2.4G RF transceiver
13. The max output power can be 12dBm

Applications

: 2.4G wireless light control scheme

: wireless teaching pen and laser pen

: Toy aircraft, toy vehicle programme

: 2.4 G remote wireless transmission module

: Security, automotive electronic remote control networking, broadcast class scheme

: Other remote control schemes

Audi A3 8v Coding List