Avery Berkel L126 Calibration -

: Press the Zero button twice until the display reads "CAL" . Confirm this selection by pressing the Test button .

Confirm and enter this submenu by pressing the blue (or store) button once. Step 3: Select the Units and Full Span Capacity

Remove the certified calibration weights from the scale bed.

Calibrating the Avery Berkel L126 indicator is a precise process that involves accessing a hidden service switch to enter the diagnostic and calibration menus. This waterproof, stainless steel indicator is commonly paired with industrial platforms for heavy-duty weighing. Step-by-Step Calibration Procedure avery berkel l126 calibration

Press the twice until the display shows CAL (Calibration). Select this mode by pressing the Test button . Configure Units & Capacity:

Before opening the device enclosure, ensure you have the appropriate equipment and environment to avoid corrupted testing:

: Remove the weights and restart the scale to return to normal weighing mode. Troubleshooting and Maintenance Inaccurate Readings? : Press the Zero button twice until the display reads "CAL"

For complex technical issues or to register for warranty support, visit the Avery Berkel Service Portal .

If your indicator fails to save calibration data, consult this quick reference table to find the root hardware or software issue: Display/Problem Root Cause Actionable Solution Zero capture exceeds the standard 2% tolerance threshold.

Gently place your certified calibration weights directly in the center of the platform. Step 3: Select the Units and Full Span

Industrial businesses using weighing infrastructure should integrate the following practices to maintain system accuracy:

Ensure the scale is not positioned directly under an HVAC vent or in direct sunlight.

After restarting, place the 10 lb weight back on the scale to verify the reading matches the certified weight exactly. If the reading fluctuates or shows an error, repeat the process ensuring the scale is perfectly level.