Cwfl-6000 Manual !!install!! Online
What (IPG, Raycus, Maxphotonics) are you pairing with the chiller? Are you facing a specific error code right now?
: Extensive warnings regarding electrical safety, proper grounding, and the risks of operating without water. Dual Temperature Control
The CWFL-6000 uses a sophisticated LCD temperature controller. The manual dedicates a section to its many functions, including:
The CWFL-6000 features a dual-channel design labeled clearly on the back of the machine: cwfl-6000 manual
If your chiller starts beeping, check the display for these standard codes found in the : E1 Ultrahigh room temperature Improve ventilation or lower room temp. E2 Ultrahigh water temperature Check for clogged dust gauze or pump failure. E3 Ultralow water temperature Normal in winter; use a heater if necessary. E4 Room temp sensor failure Inspect sensor wiring or replace sensor. E5 Water temp sensor failure Check the probe connection. E6 Water flow alarm Check for kinked hoses or low water levels. 🧹 Maintenance Schedule
Operating ambient temperature should be between 5°C and 40°C . Operating above 43°C will trigger high-temperature alarms.
| Action / Feature | How to Perform | Details | | :--- | :--- | :--- | | | Press and hold the "Set" button for ~5 seconds until the password prompt appears. | Use the ▲/▼ keys to enter the default password "168" , then press "Set" to access the user menu. | | Factory Parameter Reset | Press and hold "Set" + "Power" button for ~10 seconds until the password prompt appears. | Use the ▲ key to enter the reset password "615" , then press "Set" to restore all settings to factory defaults. | | Quick-Adjust User Menu | Under normal operation, press the "Quick Set" button . | This brings up a menu of frequently used parameters for fast, direct adjustment. | | Check Running Status | Simultaneously press and release the "Quick Set" + "▲" buttons . | The display will show real-time data like compressor and pump status, and exhaust temperature. | | Force Cooling Mode | Under normal operation, press and hold the "▲" + "▼" buttons for ~5 seconds . | This bypasses automatic controls to run the cooling system at maximum power. Press the power button to cancel. | | View Historical Faults | Press and hold "Set" + "▲" buttons for ~5 seconds , then enter password "123" . | Cycle through past error records using the ▲/▼ keys to help diagnose recurring issues. | What (IPG, Raycus, Maxphotonics) are you pairing with
Place the chiller in a clean, well-ventilated, and dry area.
Чиллер S&A (TEYU) CWFL-6000 для охлаждения ... - К2 Тул
Its rugged design is validated by international safety and quality standards, including , and an SGS-certified version (equivalent to UL standards) is also available, verifying its reliability for industrial use worldwide. Dual Temperature Control The CWFL-6000 uses a sophisticated
: A critical troubleshooting section that defines alarm codes (e.g., E1 for ultrahigh room temperature, E2 for ultrahigh water temperature). General User Feedback Comprehensive Troubleshooting
By following the setup procedures, respecting the maintenance intervals, and understanding the error codes, your CWFL-6000 will provide years of trouble-free cooling. But remember: when in doubt, go back to the manual. Every alarm has a reason, and every solution is written in those pages.
The CWFL-6000 uses a smart digital controller (usually an Italian LAE or Chinese Puma controller). Pages 18-24 of the explain how to program it. Understanding these parameters is the difference between stable cutting and constant alarms.