Creating a custom look is a straightforward process once you know the sequence: Enter Program Mode: Press and hold the button until the LED indicator flashes. Select Your Fixture: Press the numbered button (e.g., P1) for the light you want to adjust. Set the Look:
Manufacturers often sell this board under various names including "Disco 240," "HD-DMX512-DISCO240," "KLC Disco 240," or simply "240灯控台" (Chinese for "240 Light Console"). While the brand names change, the operational logic remains largely identical.
In manual mode, you can call up any connected fixture using the buttons. disco 240 dmx controller manual
Repeat for other scenes, then press and hold for 3 seconds to exit. How to Program a Chase (Sequence of Scenes)
The console changes scenes based on the sound detected by the internal microphone or line input. 6. Troubleshooting Creating a custom look is a straightforward process
Shows current bank, scene, speed, and channel values. 4. Programming the Disco 240
Press and hold the button until the indicator flashes. While the brand names change, the operational logic
: Set your fixtures to their DMX addresses. On a 240 controller, fixtures are typically spaced 16 or 20 channels apart (e.g., Fixture 1 = Address 1, Fixture 2 = Address 17, etc.). 3. Programming Scenes To save a static look:
Manages 12 scanners/fixtures (up to 20 channels each).