Ink Pad Reset Utility L3060 Full |best| | Epson

It is highly recommended to either replace the pads or install an external waste ink bottle (External Waste Ink Tank) to catch the discharge safely. Where to Find the Utility

If you’re using , the steps are quite similar: open the utility, click Read Waste Counters , and if the values exceed 100%, proceed to reset the counters using your purchased reset key.

To prevent ink from overflowing and damaging furniture or internal circuits, the printer uses a digital counter to estimate how full these pads are. The Error:

Look out for these tell-tale signs:

After resetting the counter, you must physically check the waste ink pads. If they are already saturated, resetting the counter without cleaning or replacing them will cause ink to overflow inside the printer, potentially damaging internal components, staining your desk, or ruining print quality.

Set the Port option to your specific printer port (e.g., USB001 (L3060 Series) ) and click .

Main drawbacks & risks

Click on "Particular adjustment mode."

The big design flaw is that the printer counts , not the pad's actual physical fullness. Even if your internal pads are hardly wet, once the counter hits a certain number, the printer locks up. You'll see errors like:

: Once the utility confirms the reset is complete, turn the printer off and back on again. The red blinking light error should be gone. Important Maintenance Note epson ink pad reset utility l3060 full

The Epson Ink Pad Reset Utility is a free software tool provided by Epson that allows you to reset the ink pad counter on your printer. The ink pad is a small absorbent pad located inside the printer that collects waste ink during the printing process. When the ink pad becomes full, the printer will display an error message, indicating that it's time to replace the ink pad. However, with the Epson Ink Pad Reset Utility, you can reset the ink pad counter and continue printing without having to replace the ink pad.

To clarify: The is an ink tank printer. When it displays "Service required: Ink pad is at the end of its service life" , the printer locks up. You need two things to fix it: