Firmware Reset Samsung Ml 2160 2165 2160w 2165w Better

Press and hold the WPS button.

Press and hold the Print Screen (or Stop/Clear) button. Hold it for roughly 4–5 seconds until the green LED blinks rapidly, then let go to print the Configuration Report. Hold it for roughly 10 seconds until the LED stays solid green to print the Supplies Information Report.

This usually happens if you forgot to tape over or remove the toner chip. If the printer detects an old, locked chip, it will override the fix. Remove or isolate the chip.

These community guides show how to extract the necessary printer data and apply firmware fixes to bypass toner chip restrictions: Reset Fix Firmware Samsung ML-2165 325K views · 14 years ago YouTube · Oscar Mendoza firmware reset samsung ml 2160 2165 2160w 2165w

Ensure the printer has paper loaded and the top cover is closed.

Flashing firmware carries risks. If the power is interrupted or the wrong version is used, the printer may become "bricked" and unusable. Always verify that the firmware version you are installing is compatible with your specific hardware revision. For the ML-2160W and ML-2165W, ensure you are using the wireless-specific firmware, as the standard ML-2160 files will disable your Wi-Fi functionality.

If your printer was previously updated by Samsung's official software to a very late version (such as V1.01.02.00 or higher), the bootloader may block downgrade attempts. Look specifically for an "Original Firmware Downgrade" tool or a dedicated high-version fix. Summary of Benefits Press and hold the WPS button

Before running any tools, you must identify the specific error preventing you from printing. The Samsung ML-2160 series uses a CRUM chip on the toner cartridge to track page counts. When the printer detects that the "life" of the toner has expired (even if it is full of refilled toner), it stops printing and displays an Empty or Replace Toner error.

Ensure you receive a package that includes both an executable uploader tool (usually usbprns2.exe ) and the modified firmware file. Step 3: Preparing Your System for the Flash

For official support and safe driver downloads, please refer to the HP Support website (as HP now manages Samsung Printer legacy support). Hold it for roughly 10 seconds until the

Once the printer reboots into its normal idle state, you must physically isolate the cartridge chip so the printer relies strictly on its new internal programming.

This is the most common search solution. This method disables the chip check, allowing you to use refilled or third-party cartridges.