Mitutoyo Surftest Sv400 User Manual __full__ Full -

Check cable seating. Inspect the stylus tip under a microscope for chips. Mechanical obstruction blocking the drive unit path.

Based on the manual's specifications table:

Are you operating via the or the Windows PC SURFPAK software ? What parameters ( Rmaxcap R m a x ) are you currently trying to calibrate?

The manual shows a bubble level on the base. However, the SV-400 is incredibly sensitive to twist. If your surface roughness readings are fluctuating wildly: mitutoyo surftest sv400 user manual full

The statistical measure of the profile height variations. Exporting Reports

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

measures surface features relative to the drive unit's internal reference, allowing for the evaluation of waviness and fine steps. Check cable seating

The diamond stylus tip and safety arm mechanism are highly sensitive. Never touch the stylus tip with bare fingers.

Wipe the reference specimen patch using an optical-grade microfiber cloth lightly moistened with pure isopropyl alcohol. Allow it to air-dry completely. Position the Stylus: Move the

Displays the generated profile graph (Primary Profile, Roughness Profile, or Waviness Profile). Based on the manual's specifications table: Are you

Using the joystick, lower the Z-axis until the stylus tip is roughly 2–3mm above the measurement area.

Initiate the calibration; the system automatically adjusts for Ra calibration or step calibration. 3. Measurement Procedure