Install the drivers for your USB cable before plugging it in.
PX-777 programming software was never open-source. Puxing originally distributed it as proprietary freeware with the radio purchase, but redistribution rights were never granted. Downloading from third-party archives may violate copyright laws in jurisdictions like the US (DMCA 1201, regarding access controls) or the EU (InfoSoc Directive). While enforcement is practically nonexistent for a discontinued product, ethical hams often prefer alternative solutions: open-source tools like CHIRP (which supports dozens of radios) or writing custom Python scripts using pyserial to reverse-engineer the protocol. CHIRP’s developers have noted that while the PX-777 is not officially supported, a close relative (the Baofeng UV-5R uses a similar instruction set) can sometimes be coerced into working—but this is not reliable.
Save your radio’s configuration file to your PC so you can restore it if the device is reset. puxing px-777 programming software download
Software alone won't work without the physical link. You will need a with a "K1" connector (the standard two-pin plug used by Puxing, Baofeng, and Kenwood).
Right-click the downloaded folder and select to unpack the files to your desktop. 3. Installation and Initial Configuration Follow these steps to install the executable file safely. Installing the Software Open the extracted folder and double-click Setup.exe . Install the drivers for your USB cable before plugging it in
The Puxing PX-777 remains a legendary handheld amateur radio. It is prized for its durability, affordability, and reliable performance. While you can program frequencies manually using the keypad, utilizing the official programming software saves time. Software programming allows you to manage channels, privacy codes, and advanced radio settings efficiently.
: This is a free, open-source tool that supports the PX-777. It is often more stable and easier to use than the original software. You can download it from the official CHIRP website. 🔌 Hardware Requirements Save your radio’s configuration file to your PC
There are two primary ways to acquire the necessary software for this radio:
The performance of your programming software depends heavily on the microchip embedded inside the USB end of the cable.
Go to the menu and select Write to Radio (or click the red icon pointing toward a radio).
Once the software is open and the radio is connected: