Minimum 6.0 to 9.0 liters per minute (L/min) Cooling Water Temperature: 5°C to 32°C (41°F to 90°F) Static Pressure: Approximately 1.60 to 1.65 MPa (at 20°C)
If static pressure drops due to minor leaks or during coupling reconnections, top off the system:
Helium purity is the single most critical factor in cryogenic system performance. Contaminants like air, moisture, or oil vapor will freeze inside the cold head, causing immediate loss of cooling capacity. Static Pressure Check sumitomo f50 compressor manual new
If you are looking to purchase a new compressor or need specialized maintenance, reaching out to an authorized is the best first step.
If you cannot access the GE portal, the parent company Sumitomo Heavy Industries, Ltd. is the next point of contact. However, like GE, Sumitomo will likely require verification that you are an authorized service partner before releasing the proprietary technical documents. Minimum 6
The Sumitomo F-50 compressor family includes water-cooled units like the and air-cooled versions like the FA-50 series. Both are designed to maintain an ultra-clean, high-pressure helium loop. Key Components
A critical filtration component that removes oil vapor from the helium stream, requiring replacement every 30,000 hours. Installation and Operating Guidelines If you cannot access the GE portal, the
Even microscopic amounts of air or moisture can freeze inside the cold head, stopping the displacer. Coupling Connection Procedure:
Do not use demineralized water; use standard cooling water or a 50/50 water-glycol mixture as specified for antifreeze needs.