Thyssenkrupp Levant Stair Lift Installation Manual Top !!top!! Jun 2026

The forces exerted on a stair lift at the bottom and top differ significantly.

The actual installation process typically takes a few hours [17†L35-L37] and follows these steps:

: The installer uses the controls to "drive" the unit onto the rail, a process that ensures the gears are perfectly synchronized with the track. Top-Side Completion

This document provides a comprehensive installation guide for the ThyssenKrupp (TK) Levant straight stair lift. It covers the technical steps, safety checks, and tools required to install the system on a standard staircase. 1. Pre-Installation Preparation Essential Tools Power drill and impact driver Metric Allen wrenches (hex keys) Socket wrench set Spirit level (torpedo level) Tape measure Digital multimeter (for voltage testing) Site Assessment thyssenkrupp levant stair lift installation manual top

Bolts, spacers, nylon locking nuts, and rail joiners. 3. Assembling the Rail (Track)

This is where the installation differs from the rest. The upper rail houses the copper contact strips.

The Levant requires a standard grounded electrical outlet (110V - 230V, depending on the region) within 5 feet of the stairlift's park position to keep the batteries charged. The forces exerted on a stair lift at

29 inches (740 mm) to allow comfortable clearance when the lift is in use.

A minimum staircase width of 28 inches is required, though 30+ inches is ideal for user comfort.

This comprehensive guide breaks down the essential chapters of the ThyssenKrupp Levant installation process, highlighting the critical steps, torque specifications, and safety clearances required for a flawless setup. 1. Pre-Installation Assessment and Site Preparation It covers the technical steps, safety checks, and

Ensure the staircase width meets the minimum clearance requirement of 740 mm.

To keep the ThyssenKrupp Levant running smoothly, perform these tasks every six months:

Before any rail sections are attached to the stairs, a "dry fit" or pre-assembly is performed. This involves: