Unitek Yst03004 Manual Verified Verified Page

Up to 16TB per drive (32TB total) or up to 40TB total depending on firmware version.

: The four staging LEDs (25% up to 100%) blink sequentially during data transfer cycles.

Supports two M.2 SSDs (NVMe or SATA) simultaneously.

Attach your HDMI or DisplayPort cables from the dock to your external monitors. unitek yst03004 manual verified

This article is for informational purposes. Always refer to the official manufacturer’s documentation for electrical specifications. The author is not affiliated with Unitek.

into the wall and connect it to the dock's rear power input port.

Ensure no monitors or USB drives are plugged into the dock yet. Up to 16TB per drive (32TB total) or

Unitek does not always provide physical manuals with their budget accessories. However, verified digital copies are available from:

Always use the safely eject feature in your OS before pulling storage cards or flash drives from the dock. What is the exact ? Which specific port or feature is giving you trouble?

The capacity of the drive in Bay B (Target) must be equal to or greater than the capacity of the drive in Bay A (Source) . Any data on the target drive will be permanently overwritten. Execution Steps Insert the drive you want to copy into Bay A (Source) . Insert your destination drive into Bay B (Target) . Plug in the DC power adapter and turn the power switch ON . Attach your HDMI or DisplayPort cables from the

USB 3.0 specification offers speeds up to

: Includes a high-efficiency 12V / 3A (36W) power adapter to ensure stable energy for large 3.5-inch mechanical drives.